VITA In-Ceram® YZ for inLab®

VITA In-Ceram^® YZ for inLab^®

Pre-sintered blocks made from yttrium-stabilized zirconium oxide (Y-TZP)

VITA In-Ceram YZ – thanks to its outstanding material strength (> 900 MPa) – enables the fabrication of delicate crown and bridge structures with optimum marginal accuracy. VITA In-Ceram YZ is considered as the "diamond" among dental ceramics!

VITA In-Ceram YZ enables the fabrication of precise, individual restorations with consistent high quality and high functional strength.

Substructures are veneered with the VITA VM 9 veneering ceramic. VITA customers benefit from a perfectly matched system of veneering and substructure ceramic.

Feature/Benefits

High clinical safety / load strength:

A very high material strength (> 900 MPa) and excellent fracture toughness values. Around 10 years of clinical experience.

Excellent marginal fit / high quality:

The extremely homogeneous material ensures a consistently high degree of marginal accuracy and distortion-free sintering. The precise determination of the scaling factor for each batch – and the information stored in the barcode of the block – guarantee a controlled degree of sintering shrinkage, and hence optimum precision.

Reduced production time:

Thanks to the industrially preshaded VITA In-Ceram YZ Color LL1p blocks, there is no need for manual coloration.

Homogeneous shading:

Industrially preshaded blocks guarantee homogeneous shading throughout, and hence consistently reproducible aesthetics.

Wide range of indications:

VITA In-Ceram YZ covers all indications from crown substructures to multi-unit bridge substructures with ten bridge units with a maximum of two adjacent pontics.

Indications:

Anterior and posterior crowns and multi-unit bridges

Shades:

VITA In-Ceram YZ can be shaded with YZ COLORING LIQUIDS. In addition to this, VITA zirconium dioxide is also available as an industrially preshaded version in the shade Color LL1p.

Geometry:

VITA In-Ceram YZ for inLab, non-coloredand Color LL1p

System compatibility:

CEREC-/CEREC MC XL and inLab/inLab MC XL systems from Sirona. CEREC users require the inLab software.

Individualization:

VITA In-Ceram YZ restorations can be individualized with VITA VM 9 veneering material.

Bonding:

Glass ionomers and composites are suitable for bonding the highly stress-resistant oxide ceramic substructure. When using composites, the dual-curing PANAVIA F2.0 and the chemically curing PANAVIA 21 (both available from Kuraray) are recommended.